Drop us a line

Hydraulic cylinders

The company „FORESTER“ produces serial hydraulic cylinders with piston diameter of 30 – 200mm and stroke up to 4000mm. Among them there are:

  • single-acting and double-acting piston hydraulic cylinders;
  • plunger hydraulic cylinders;
  • telescopic hydraulic cylinders;
  • hydraulic cylinders with damping of the end of stroke on one or both sides;
  • hydraulic cylinder with installed hydraulic locks that lock one or two cavities. These cylinders are used on the manipulators to secure the stroke. It’s possible to install both external and internal hydraulic locks, when a hydraulic lock is placed in the “body” of the hydraulic cylinder.

Double-acting hydraulic cylinders

To drive the working bodies of the mobile machines most widely double-acting piston cylinders with one-sided stem are used.

The main parameters of the hydraulic cylinder: diameter of the piston D and bar d, working pressure P and run S.

According to the working pressure, piston and seal constructions of the hydraulic cylinders produced by company “Forester” are divided into:

  • Cylinders with a working pressure up to 300 bar, with a complex five-seal piston and a fastening nut;
  • Cylinders with operating pressure up to 400 Bar, a piston mounted on the thread with radial locking screw, with an additional guide;
  • Cylinders with a working pressure up to 300 Bar, with a comprehensive five-compact piston seal and a piston;
  • Cylinders with a working pressure up to 300 Bar, with a comprehensive five-seal piston mounted on the thread with a radial locking screw.

Plunger cylinders

Plunger cylinders are single-acting hydraulic cylinders in which the working fluid is introduced into the cylinder under pressure only in one direction, causing the movement of the plunger (output link). The plunger returns back to its original position due to external forces or elastic elements.

  • Hydraulic cylinder without sleeve and piston sealing elements mounted in the corps;
  • Hydraulic cylinder with removable sleeve and the guide elements of the plunger;

Telescopic cylinders

The company “Forester” offers high-quality, reliable telescopic cylinders for use in mobile equipment when hydraulic cylinders with long piston, but small dimensions are necessary.

  • Single-acting telescopic hydraulic cylinder with two spherical bearings;
  • Single-acting telescopic cylinder with a spherical bearing and intermediate axis of the corps variation.

Special hydraulic cylinders

The company "Forester" produces special hydraulic cylinders of any complexity in accordance with all the requirements of the customer.

In some cases, the ordinary single-acting and double-acting hydraulic cylinders can’t be effectively used without special post-treatment.

Most often such cases arise when you want to have large stroke length with a small occupied space, a lot of effort with a limited diameter of the piston, the implementation of end position cushioning or enforceability lock cylinder bore. These and other requirements have led to special constructions of hydraulic cylinders, which are more complex, require higher production costs and are generally used on special machines in certain operating conditions.

  • Special different diameters, same direction moving double-rod hydraulic cylinder;
  • Special same diameter double-rod hydraulic cylinder;
  • Tandem hydraulic cylinder;
  • Hydraulic cylinder with the ball bearing on the stock and supply of working fluid through the fixed corps;
  • One-sided hydraulic cylinder with a cylindrical returning spring;
  • Special one-sided hydraulic cylinder with a flat returning spring;
  • Hydraulic cylinder with a ball bearing in a corps and a pass of working fluid through a fixed hollow stem;
  • Special hydraulic cylinders with external locks;
  • Hydraulic cylinder with built-in locks which allow to obtain a compact cylinder with a reliable locking of cylinder cavities;
  • Special hydraulic cylinder with two-way damping of stroke;
  • Special hydraulic cylinder with one-way damping of stroke.

Special hydraulic cylinders with external locks

  • Hydraulic cylinder with external lock allowing to modernize a conventional double-acting hydraulic cylinder into a cylinder with lockable cavities;
  • Special hydraulic cylinders with external locks;
  • Hydraulic cylinder with built-in locks which allow to obtain a compact cylinder with a reliable locking of cylinder cavities;

With the damping of stroke

One-way or two-way damping reduces the inertial forces acting on the details and mechanisms when large masses move at high speeds.

  • Special hydraulic cylinder with two-way damping of stroke;
  • Special hydraulic cylinder with one-way damping of stroke.

Double-rod and tandem

Cylinders of this type are used in special conditions.

  • Tandem hydraulic cylinder;
  • Special same diameter double-rod hydraulic cylinder;
  • Special different diameters, same direction moving double-rod hydraulic cylinder

One-sided hydraulic cylinders with a returning spring

  • One-sided hydraulic cylinders with a cylindrical returning spring;
  • Special one-sided hydraulic cylinder with a flat returning spring.

Hydraulic outriggers

Hydraulic outriggers are used in the construction of additional supports, increasing the stability of cranes, excavators, lifts and derricks against overturning.

  • Hydraulic cylinder with a ball bearing in a corps and a pass of working fluid through a fixed hollow stem;
  • Hydraulic cylinder the ball bearing on the stock and supply of working fluid through the fixed cylinder corps.

Sleeves

Depending on the purpose and design of the hydraulic cylinder company "FORESTER" uses various kinds of sleeves.

Pistons

Depending on the purpose, design, working pressure and operating conditions of hydraulic cylinders the company “FORESTER” uses various kinds of pistons.

Seals

Hydraulic cylinders produced by the company “Forester“ use high-quality seals from leading European manufacturers to ensure the availability of hydraulic cylinders at a maximum pressure of 500 bar and a temperature range from -40 to +120 ° C.

Fastening details of hydraulic cylinders

All hydraulic cylinders produced by the company “Forester” can be equipped with various fastening details:

Pins and threaded fittings

Depending on the purpose and requirements of the customer, the company “Forester” uses different types of pins and threaded fittings systems with different seals threaded connections.

Bars and tubes from “Cromsteel” company

Cromsteel Industries S.A. manufactures bars and tubes for hydraulics (hydraulic cylinders, pneumatic cylinders, shock absorbers, gas springs) and linear motion.

WORKING WITH US YOU GET:

  • professional advice and a selection of the necessary hydraulics;
  • samples supply for industrial tests;
  • wide range of hydraulic cylinders;
  • individual approach;
  • optimal price level.

The company is aimed at the professional selection of the necessary hydraulic equipment and the organization of the supply to the plants. Supplied hydraulic equipment corresponds to the high level of reliability, safety and durability. Due to deep knowledge of the domestic market the company is able to offer most relevant and effective solutions.